Auto Pac 300 Arch Strapper
The Auto PAC 300 arch strapper is a reliable strapping machine designed for moderate to high volume applications. It delivers fast and consistent performance at an affordable price, using cost effective 3/8” (9mm) or 1/2” (12mm) strap.
- Manufacturer: PAC Strapping Products
- Model: 300
- Serial Number: N/A
- Year: N/A
- Arch Strapper
- Condition: Good Working Condition
- Lubrication Free Strapping Head — The strapping head never needs lubrication.
- Auto Feeding Loading strap is automatic, activated by pressing the feed switch.
- Jam Free Automatic Re-Feeding In the event of any feeding problems, the strap is automatically re-fed into the strapping head, and the machine returns to the ready position.
- Loop Ejection Missed straps are automatically ejected from the machine, and the Auto PAC 300 re-sets itself.
- End of Strap Sensor — If the coil does not have enough strap to complete the cycle, the Auto PAC 300 ejects the short piece, and the machine is immediately ready for a new coil.
- Three Activation Methods — The Auto PAC 300 can be activated manually, with a foot pedal, or with a standard photocell.
- Electronic Tension Tension is controlled electronically, yielding consistent tension.
- Improved Speed Up to 30 cycles per minute.
- CE Certified
TECHNICAL SPECIFICATIONS
- Dimensions: 56.3”L x 24.4”D x 60.6”H
- Weight: 485 lbs.
- Table Height: 31.9”
- Conveyor Speed: 59 – 137 feet per minute
- Tension Range: 15 – 150 lbs.
- Speed: 30 cycles per minute
- Package Size:
- Minimum- 5”W x 1 1/4”H
- Maximum- Depends on arch size
- Strap Size: 3/8” (9mm) – 1/2” (12mm)
- Core Size: 8×8, 9×8
- Power Requirements: 110V, Single phase 50/60 Hz
Loading
